Laserfiche WebLink
watright basin="modeled basin" -rightss rin=makenet.rin -rin -ostatemod <br />The evaporation data file consists of several monthly evaporation estimates for a reservoir at a <br />given elevation range. The evaporation data file was created using the netresev DMI utility. <br />Each set of evaporation estimates is based upon a nearby precipitation station and the National <br />Oceanic and Atmospheric Administration (NOAA) monthly gross evaporation estimates: <br />(netresev yampa -ft -ave P=7936 -w.5 P=9265 -w.5 E=0 <br />JAN. 033x.1x.2x.3x.42x.52x.53x.43x.37x.25x.13x.05). <br />See also the netresev DMI documentation. <br />The end-of--month content file, similar to the historic streamflow file, was constructed using the <br />tstool DMI. Here, modeled reservoirs are selected in order of the reservoir station file, and tstool <br />creates a time series file of historic end-of--month reservoir contents in StateMod format. As with <br />the streamflow file, tstool has the capability to do various data filling procedures to address <br />incomplete reservoir end-of--month records. <br />The last reservoir file, the reservoir target content file (*. tar), is constructed in the same format <br />as the end-of--month file. The one exception is that each reservoir has two lines of information <br />per year: a maximum target content and a minimum target content. Reservoir target data may <br />reflect historic operations or estimated future operations. Please refer to the target file in <br />Appendix A in any one of the CRDSS basins' model documentation for examples. <br />2. S Instream Flow Files <br />StateMod requires three instream flow files: the instream flow station file (*. ifs), the instream <br />flow right file(*.ifr), and the instream flow demand -annual file (*.ifa). The instream flow <br />station file and the instream flow right file represent the location of the instream flow node <br />within the model and its corresponding water rights, respectively. As with the station and water <br />rights files for the diversions and reservoirs, the equivalent instream flow files are generated <br />using the watright DMI utility: <br />(watright basin="modeled basin" -rightsi rin=makenet.rin -rin <br />-ostatemod) <br />The instream flow demand file - annual is manually created based on information contained in <br />the water rights tabulations or interviews. Please see the *. ifa file in Appendix A in any one of the <br />CRDSS basins' model documentation for examples. <br />2.6 Miscellaneous Files <br />All of the remaining input files for StateMod are created manually. These files include the <br />operation file (*.opr), response file (*.rsp), delay table file (*.dly), control file (*.ct~, geographic <br />information system file (*.gis), and output request file (*.out). Details concerning each of these <br />files are discussed in Section 4, Input Description, of the StateMod Manual. <br />3.0 Model Operation <br />