Laserfiche WebLink
The water rights DMI utility ( ) will be run from the command line by specifying the basin <br />watright <br />name. The command line syntax is shown below: <br />watright basin <br />Utility Input <br />The water rights DMI utility ( ) requires the <basin>.ctl as input. This file will be created by <br />watright <br />the water rights modeling group with the aid of the data browser utilities defined in the General <br />Methodology section. The water rights information contained in the <basin>.ctl file will consist of the <br />wdids, administration numbers, names, capacities, irrigated acres, consumptive use time series IDs, <br />irrigation efficiencies, and decree amounts of all the water rights to be included in the water rights <br />planning model. <br />Variables and information are defined within the <basin>.ctl file using techniques. Techniques are key <br />words that pass information to the utility. Techniques available for the water rights DMI utility <br />( ) include: <br />watright <br />KEY - designates a primary or aggregated group of rights to be modeled <br />INPUT - designates water rights input (wdid, administration number, and decree amount) <br />GLOBAL - designates a global default <br />LOCAL - designates a local default <br />ORDER - designates a network order number <br />The water rights DMI utility ( ) will check the <basin>.ctl file for unique description fields. It <br />watright <br />is important that the descriptions be unique for each modeled key right. <br />Global and local values for variables are set within the <basin>.ctl file using the techniques and <br />GLOBAL <br />. Global defaults are contained at the top of the file, while local variables are set on the lines <br />LOCAL <br />immediately below the definition of each key water right. Global default values for variables will be <br />used in the calculations unless a local value is specified. Variables for which global and local defaults <br />can be specified include: <br />version( ) - version number for control file. <br />version <br />river basin ( ) - river basin containing water right. Note this ID is unique to each basin, and <br />basin <br />only one river basin may be specified per input file. <br />efficiency ( ) - irrigation efficiency. <br />eff <br />The <basin>.ctl file may contain comments. All comment lines must begin with the pound symbol ( ); <br /># <br />all key water rights must begin by specifying the technique and a description. The lines <br />, <br />KEY <br />immediately following the key water right definition are the lines containing individual water rights that <br />are to be aggregated into the key right. Information regarding individual water rights must be specified <br />to include description, wdid, administration number, decree amount, capacity, and irrigated acreage. <br />This information is all specified through the technique All six pieces of information (name, <br />. <br />INPUT <br />wdid, administration number, decree amount, structure capacity, and irrigated acreage) must be specified <br />for each water right in the order given above. <br />4 <br />A275 01.09.95 1.15-13 Ritsch <br />