Laserfiche WebLink
In addition, the user can select to graph the results when running the program from the CRDSS GUI. <br />crdssgr <br />The GUI for the BRM is similar to the Annual Operating Plan (AOP) GUI. The GUI uses the <br />xmgr <br />and routines to prepare and display graphical output from the CRSM runs. Details regarding the <br />use of the programs is given in the CRDSS Users? Manual and is available in the on-line documentation. <br />The programs were run to verify that the SGI and PC versions of the software were producing the same <br />results as the original USBR CRSS. The program DELCRSM was used to compute the individual <br />monthly differences and total average monthly differences between the USBR results and the PC and <br />SGI program output. For the scenarios generated, the results show that the programs produce numbers <br />that are all within 0.01 percent of each other. Most of the numbers are the same to within 8 digits. The <br />main differences are likely caused by differences in the precision of the large numbers being calculated. <br />The prototype model was developed in accordance with the software prototyping procedures described in <br />Task Memorandum 1.05-22. The GUI was developed in accordance with the procedures described in <br />Task Memoranda 1.05-15, 1.05-16, 1.05-17, and 1.05-18. Special consideration was given to the <br />development of GUI features that were common to both the BRM and AOP models (see Task <br />Memorandum 1.13-1). <br />3.0 CONCLUSIONS AND RECOMMENDATIONS <br />A prototype BRM was developed by porting CRSS to the SGI workstation and developing a BRM GUI. <br />The recommendation at this point in the project is to use the current program as the CRDSS BRM and to <br />continue to follow the progress of the USBR project to develop a CRSS replacement. <br />2 <br />A275 01.09.95 1.12-1 Brazil <br />