Laserfiche WebLink
RGDSS Memorandum <br />Final <br />TO: Ray Bennett <br />FROM: Ed Armbruster, Hydrosphere <br />SUBJECT: RGDSS Surface Water, Task 7.8 -Phase 1 b Evaluate Baseflows, Verify <br />Model Operation, and Historical Diversion Check Runs and Analysis <br />DATE: March 17, 2000 <br />CC: Randy Seaholm <br />Introduction <br />This memorandum represents delivery associated with Task 7.6 (Generate and Evaluate <br />Baseflows), Task 7.7 (Verify Model Operation -Check Mode), and Task 7.8, Historical <br />Diversion Check Runs and Analysis. The objectives of these tasks are as follows: <br />Task 7.6: Operate StateMod model in Baseflow mode with Phase 1 b monthly input files. <br />Generate and evaluate Baseflows checking for reasonableness. <br />Task 7.7: Operate StateMod model in Check mode with Phase 1 b monthly input files. <br />Evaluate and correct input data based on generated error messages. <br />Task 7.8: Operate StateMod model in Simulation mode with Phase 1 b monthly input files <br />and Baseflows. Evaluate results for reasonableness of the resulting flows and diversions. <br />Review of Phased Modeling Approach <br />The Rio Grande Surface Water Model is being developed in a phased approach whereby an <br />increasing percentage of basin-wide consumptive use is represented. When the model is <br />completed, 100 percent of consumptive use in the basin will be represented by numerous <br />agricultural, municipal and industrial demands. In Phase la efforts, modeled demands reflect <br />approximately 90 percent of the total decreed surface water use in the basin (by roughly 425 <br />different water users). In Phase la of model development, the remaining decreed surface water <br />use is "left in the gage." Phase lb of model development builds upon Phase la results and <br />models 100 percent of consumptive use associated with lands served by surface diversions. <br />Finally, Phase lc builds upon previous efforts by including groundwater use, and results in a <br />model that includes 100 percent of all, surface and ground, water use in the basin. <br />Phase 1b Model Input Files <br />Phase lb development of the Rio Grande Surface Water Model included refinement of many of <br />the input files developed during Phase la efforts. The majority of these input files were created <br />using Data Management Interfaces (watright, demandts, tstool, makenet, makertn) by executing <br />command files were made to reflect the addition of 46 aggregated diversion structures to the <br />C:Acdss\Task7-8.doc Phase lb Model March 17, 2000 -Page 1 of 10 <br />