Laserfiche WebLink
<br />i..1 <br />I <br />I <br />,. <br />I <br />I <br />I <br />I <br />I <br />I <br />It <br />I <br />I <br />I <br /> <br /> <br />I This meets the drainage-area requjrement, and the following relation is used: <br /> <br /> <br />I <br /> <br />where X=0.48 for the Plains Region, and QT(G) is the weighted discharge from <br />I table 5. <br /> <br /> <br />I <br />, <br />I <br /> <br />~ <br />" I <br /> <br />,1 <br /> <br />MANUAL FOR ESTIMATING FLOOD CHARACTERISTICS <br /> <br />23 <br /> <br /> <br />SITES NEAR GAGED SITES ON THE SAME STREAM <br /> <br />, Peak discharge information for study sites near gaged sites on the same <br />stream can be computed using the method described on page 4. The first step <br />is to determine the drainage area ratio of ungaged site to gaged site. If <br />that ratio I ies between 0.5 and 2.0, the equation given on page 4 should be <br />used to compute the required peak discharges.' ,If the drainage area ratio <br />lies outside the range, the method for "Ungaged Sites" should be used. <br /> <br />" <br /> <br />" <br /> <br />Flood depth information for study sites near gaged sites on the same <br />stream should be computed from the flood depth regression equations for the <br />region in which the study site lies. The method is illustrated in Example 2. <br /> <br />Example 2.--FZood Frequency near a Gaged Site <br /> <br />i <br /> <br />1 <br />ii <br />.1 <br />il <br />i <br />;1 <br /> <br />Determine the QIO-, QSO-, QIOO-' and QSOO-year recurrence-interval <br />floods for Cherry Creek at State Route 83, 4.5 mi south of Franktown, Colo. <br />(lat 39019'41'1, long 104044'02", NW!sec. 25, T. 8 S., R. 66 W.). <br /> <br />Map coverage: <br /> <br />Russellville Gulch quadrangle, scale = 1:24,000 <br />Denver quadrangle, scale = 1:250,000. <br /> <br />From table 5, note that station 06712000 Cherry Creek,near Franktown, <br />Colo. (AG =169 mi2), is located downstream. <br />age <br /> <br />Determine the contributing drainage area at the site (AU=132 mi2). <br /> <br />Check that AU is either more than half AG or less than twice AG: <br /> <br />AU~AG=132 mi2~169 mi2=0.78. <br /> <br />QT(U)=(AU~AG)XQT(G) <br />