FLOOD11713 - Laserfiche WebLink

Home Browse Search

The locations of the reaches determined for the flooding sources of Palisade are shown on the Flood Profiles (Exhibit 1) and summarized in Table 2. 5.2 Flood Hazard Factors . The Flood Hazard Factor (FHF) is used to establish relationships between depth and frequency of flooding in any reach. This rela- tionship is then used with depth-damage relationships for various classes of structures to establish actuarial insurance rate tables. The FHF for a reach is the average weighted difference between the 10- and 100-year flood water-surface elevations rounded to the nearest one-half foot, multiplied by 10, and shown as a three- digit code. For example, if the difference between water-surface elevations of the 10- and 100-year floods is 0.7 foot, the FHF is 005, if the difference is 1.4 feet, the FHF is 015, if the difference is 5.0 feet, the FHF is 050. When the difference between the 10- and lOO-year flood water-surface elevations is greater than 10.0 feet, it is rounded to the nearest whole foot. 5.3 Flood Insurance Zones Flood insurance zones and zone numbers are assigned based on the type of flood hazard and the FHF, respectively. A unique zone number is associated with each possible FHF, and varies from 1 for a FHF of 005 to a maximum of 30 for a FHF of 200 or greater. Zone A6: Special Flood Hazard Areas inundated by the lOa-year flood, with base flood elevations shown, and zones subdivided according to FHFs. Zone B: Areas between the Special Flood Hazard Areas and the limits of the 500-year flood, areas that are protected from the 100- or 500-year floods by dike, levee, or other local water-control structure, areas subject to certain types of 100-year shallow flooding where depths are less than 1.0 foot, and areas subject to laO-year flooding from sources with drainage areas less than 1 square mile. Zone B is not subdivided. .;; Zone C: Areas of minimal flood hazard, not subdivided. 9