Laserfiche WebLink
<br />3-17 <br /> <br />~- <br /> <br />Table 3-4. Association of cross section/structure <br />numbers with TR-20 Standard Control statements <br /> <br />Statement <br /> <br />Number of <br /> <br />6 RUNOFF 1 <br /> <br />Cross section <br /> <br />or structure <br /> <br />6 RESVOR 2 <br /> <br />Structure <br /> <br />6 REACH 3 <br /> <br />Cross section <br /> <br />6 ADDHYD 4 <br /> <br />Cross section <br />or structure <br /> <br />~ <br /> <br />6 SAVMOV 5 <br /> <br />Cross section <br />or structure <br /> <br />6 DIVERT 6 <br /> <br />Cross section <br />or structure <br /> <br />What the number designates <br /> <br />Drainage area for which the <br />hydro graph is developed <br /> <br />Structure through which routing <br />is performed <br /> <br />Terminal point to which the stream <br />reach routing is performed <br /> <br />Point at which the two <br />hydrographs are combined <br /> <br />Hydrograph being moved internally <br />between storage locations <br /> <br />Output hydrograph number 1 <br /> <br />The three '''Data Field" headings (Columns 25 through 36, 37 through 48, <br />and 49 through 60) are filled with data according to the individual <br />headings as explained below. Data entered in each of these field <br />must have a decimal point. If no decimal point is entered its location <br />is assumed but probably not where the user intended. No error message <br />is printed for this error, however, any time such data are printed and <br />exceeds the number of print positions, asterisks are printed in the <br />edited listing of Standard Control instructions. Commas must not be <br />used within data fields to indicate thousands. <br /> <br />. <br /> <br />. <br /> <br />Different output options may be specified in columns 6l-72. These <br />options are discussed in Section 3.6.9. <br /> <br />~,~^\ <br /> <br />