|
<br />19. U.S. Bureau of Reclamation, Water Resources Technical Publication, Design of Small
<br />Dams, 1973
<br />
<br />20. u.s. Geological Survey, Water Supply Paper No. 1683, Magnitude and Frequency of
<br />Floods in the United States.. Part 9.. Colorado River Basin, 1966
<br />
<br />21. U.S. Soil Conservation Service, Hydrology.. SCS National Engineering Handbook.
<br />Section 4, 1964, revised 1969
<br />
<br />22. City of Steamboat Springs, Colorado, Two-Foot Contour Interval Digital Topography
<br />of Steamboat Springs and Vicinity, based on 1994 aerial photography
<br />
<br />23. D&D Surveying Inc., Five-Foot Contour Interval Topography for Routt County..
<br />Colorado, based on 1994 aerial photography
<br />
<br />24. Taylor Engineering Services Inc., "Yampa River Floodplain Impact Analysis for River
<br />Valley Resource", Routt County, Colorado, March 24,2003
<br />
<br />25. U.S. Geological Survey and State of Colorado Department of Natural Resources,
<br />Colorado Water Conservation Board, Determination of Roughness Coefficients for
<br />Streams in Colorado - Water Resources Investigation Report 85-4004, Jarrett,
<br />Robert D., Lakewood, Colorado, 1985
<br />
<br />26. Mountain Surveying & Mapping, Inc., Stream Cross Section Surveys: Yampa River.
<br />Elk River.. Burgess Creek. and Walton Creek. Steamboat Springs. Colorado, October
<br />and November 1999
<br />
<br />27. U.S. Army Corps of Engineers, Hydrologic Engineering Center, HEC-RAS: River
<br />Analysis System. Version 3.0, January 2001
<br />
<br />28. Routt County Planning Commission, Topographic Map, Scale 1 :2,400, Contour
<br />Interval 2 feet
<br />
<br />29. Dale Y. Foster, Inc., Topographic Map, Scale 1:4,800, Contour Interval 5 feet,
<br />Steamboat Springs Area
<br />
<br />30. State of Colorado, Topographic Maps, Scales 1:2,400 and 1:4,800, Contour Interval
<br />2 feet
<br />
<br />31. Water Supply Paper No. 1849, Roughness Characteristics of Natural Channels, 1967
<br />
<br />32. u.S. Bureau of Reclamation, Office of the Chief Engineer, Guide for Application of
<br />Water Surface Profile Computer Program WSPP5H.. Denver, Colorado, 1968
<br />
<br />33. Dismuke and Dismuke Consultants, Inc., 2 foot contour maps prepared from aerial
<br />photos of June 2, 1981
<br />
<br />34. U.S. Army Corps of Engineers, Hydrologic Engineering Center, HEC-2 Water-Surface
<br />Profiles. Generalized Computer Program, Davis, California, October 1973
<br />
<br />60
<br />
|