Laserfiche WebLink
<br />.... <br />co Follow the instructions. '~emove the Progrsm Disk from Drive A and <br />..... replace it ,with the Data Disk if you are using a sing~e floppy disk <br />tv system. Then press any key. You will see the following screen: <br /> <br />-----------~-------------------------------~---~-------- <br /> <br />COLORADO RIVER SALINITY REPORT <br /> <br />CURRENT MENU: LOADDATA <br />CURRENT FILE NAME: NONE <br /> <br />THE FOLLOWING DATA FILES EXIST ON DRIVE B: <br /> <br />334~URR.DAT <br /> <br />500-CURR.DAT <br /> <br />334-10YR.DAT <br /> <br />500-10YR.DAT <br /> <br />180244 BYTES FREE <br /> <br />PLEASE ENTER NAME OF FILE FOR LOADING DATA:? <br />NOTE: DO NOT ENTER THE EXTENSION (.DAT), ENTER ONLY ,THE ,FILE NAME. <br />,YOU MUST HAVE 34150 BYTES FREE TO CREATE A NEW DATA FILE. <br /> <br />Press any key when ready. <br /> <br />---------------------~-------------------------------------------------- <br /> <br />SCREEN 6 - LOAD DATA <br /> <br />Again follow the instructions. For example, if you wish to use the d~tE\ <br />in the second of the four files listed on Screen 6, then type <br /> <br />500~URR <br /> <br />Notice, that the . DAT is not typed. Press <br />file will be loaded from the data disk. <br />you will see the mess~e <br /> <br />RETURN and the .data in that <br />At the bottom ,of the, screen <br /> <br />PLEASE WAIT ~ LOADING DATA FROM FILE. <br /> <br />This takes a few seconds. After the data has been loaded, you will b" <br />returned to Screen 3 (main menu). <br /> <br />The remainder of the progrsm is divided into five main' sections <br />corresponding to the first five numbers on Screen 3; i.e" 1, 2, 3; 4, 5. <br />There is also a section (Section 6) describing how to save data for later <br />use, i.e., use of the response of 1 on Screen 4. Each' of these sections <br />will be described in the following pages. <br /> <br />8 <br />